| Revision 469 (by ahitrov, 2014/12/24 13:57:26) |
Moving Contenido to Apache 2
|
##############################################################################
# $HeadURL: http://svn.dev.rambler.ru/Contenido/branches/utf8/ports/etc/ports.mk $
# $Id: ports.mk 1526 2010-03-29 11:11:10Z ahitrov $
###############################################################################
PREFIX ?= ${error PREFIX must be defined}
PORTSWRK ?= ${error PORTSWRK must be defined}
PORTSDIR ?= ${basename ${shell cd ../../ && pwd}}
PORTSDB ?= ${PORTSWRK}/db
DISTDIR ?= ${PORTSWRK}/distfiles
MASTER_CPAN_SITES ?= \
http://www.cpan.dk/modules/by-module/ \
ftp://ftp.kddlabs.co.jp/lang/perl/CPAN/modules/by-module/ \
ftp://ftp.dti.ad.jp/pub/lang/CPAN/modules/by-module/ \
ftp://ftp.sunet.se/pub/lang/perl/CPAN/modules/by-module/ \
ftp://mirror.hiwaay.net/CPAN/modules/by-module/ \
ftp://ftp.mirrorservice.org/sites/ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module/ \
ftp://bioinfo.weizmann.ac.il/pub/software/perl/CPAN/modules/by-module/ \
ftp://csociety-ftp.ecn.purdue.edu/pub/CPAN/modules/by-module/ \
ftp://ftp.isu.net.sa/pub/CPAN/modules/by-module/ \
ftp://ftp.ucr.ac.cr/pub/Unix/CPAN/modules/by-module/ \
ftp://ftp.cs.colorado.edu/pub/perl/CPAN/modules/by-module/ \
ftp://cpan.pop-mg.com.br/pub/CPAN/modules/by-module/ \
ftp://ftp.is.co.za/programming/perl/CPAN/modules/by-module/ \
http://at.cpan.org/modules/by-module/ \
ftp://ftp.chg.ru/pub/lang/perl/CPAN/modules/by-module/ \
ftp://ftp.auckland.ac.nz/pub/perl/CPAN/modules/by-module/
MASTER_SITES ?= /usr/local/dist \
http://contenido.me/repos/Contenido/cnddist \
http://svn.dat.ru/repos/cnddist/trunk
MASTER_POST_SITES ?=
ifdef MASTER_CPAN_SUBDIR
MASTER_SITES += ${addsuffix ${MASTER_CPAN_SUBDIR},${MASTER_CPAN_SITES}}
endif
PORTDIR = ${basename ${shell pwd}}
PORTNAME ?= ${shell echo ${PORTDIR} | sed 's/.*\///'}
PORTVERSION ?= ${error PORTVERSION must be defined}
DISTFILE ?= ${PORTNAME}${PORTVERSION:%=-%}.tar.gz
WRKDIR = ${PORTSWRK}/work/${PORTNAME}
WRKSRC ?= ${WRKDIR}/${DISTFILE:%.tar.gz=%}
OPSYS = ${shell uname}
FETCH_CMD ?= ${shell which fetch || which wget || echo ''}
FETCH_ARGS ?= ${shell perl -e 'print "-o" if "${FETCH_CMD}" =~ /fetch$$/; \
print "-P" if "${FETCH_CMD}" =~ /wget$$/;'}
MAKE_RECURSIVE = ${MAKE} -s MFLAGS= MAKEFLAGS= MAKELEVEL= PERL_CHECKED=
MAKE_RECURSIVE_PERL = ${MAKE} -s MFLAGS= MAKEFLAGS= MAKELEVEL=
include ${PORTSDIR}/etc/perl.mk
#########################
# Common for Perl modules
#########################
ifneq (${PERL_MAKEMAKER}${PERL_MODBUILD},)
CONFIGURE_ENV ?= PERL5LIB='${PERL_LIBCOL}' MAKE=${MAKE}
BUILD_ENV ?= PERL5LIB='${PERL_LIBCOL}' MAKE=${MAKE}
INSTALL_ENV ?= PERL5LIB='${PERL_LIBCOL}' MAKE=${MAKE} OPSYS=${OPSYS}
PERL_CHECK ?= yes
PERL_CHECK_MODULE ?= ${PORTNAME}
PERL_CHECK_VERSION ?= ${PORTVERSION}
endif
#####################
# ExtUtils::MakeMaker
#####################
ifdef PERL_MAKEMAKER
CONFIGURE_COMMAND ?= ${PERL} Makefile.PL
ifeq (${OPSYS},FreeBSD)
CONFIGURE_ARGS ?= INSTALLDIRS="site" \
PREFIX="${PREFIX}" \
INSTALLPRIVLIB="${PREFIX}/lib/perl5/site_perl/${PERL_VER}" \
INSTALLARCHLIB="${PREFIX}/lib/perl5/site_perl/${PERL_VER}/${PERL_ARCH}"
else
CONFIGURE_ARGS ?= INSTALLDIRS="site" \
PREFIX="${PREFIX}" \
INSTALLPRIVLIB="${PREFIX}/lib/perl5/site_perl/${PERL_VER}" \
INSTALLARCHLIB="${PREFIX}/lib/perl5/site_perl/${PERL_VER}/${PERL_ARCH}" \
INSTALLSITELIB="${PREFIX}/lib/perl5/site_perl/${PERL_VER}" \
INSTALLSITEARCH="${PREFIX}/lib/perl5/site_perl/${PERL_VER}/${PERL_ARCH}"
endif
endif
#####################
# Module::Build
#####################
ifdef PERL_MODBUILD
CONFIGURE_COMMAND ?= ${PERL} Build.PL
CONFIGURE_ARGS ?= create_packlist=0 \
install_path=lib="${PREFIX}/lib/perl5/site_perl/${PERL_VER}" \
install_path=arch="${PREFIX}/lib/perl5/site_perl/${PERL_VER}/${PERL_ARCH}" \
install_path=script="${PREFIX}/bin" \
install_path=bin="${PREFIX}/bin" \
install_path=libdoc="${PREFIX}/man/man3" \
install_path=bindoc="${PREFIX}/man/man1"
BUILD_COMMAND ?= ${PERL} Build
INSTALL_COMMAND ?= ${PERL} Build install
endif
#####################
# default
#####################
PORT_DEPENDS ?=
CLEAN_PRECMD ?=
CLEAN_POSTCMD ?=
CONFIGURE_PRECMD ?=
CONFIGURE_POSTCMD ?=
CONFIGURE_ENV ?=
CONFIGURE_POSTENV ?=
ifeq (${OPSYS},Linux)
CONFIGURE_COMMAND ?= bash ./configure
else
CONFIGURE_COMMAND ?= ./configure
endif
CONFIGURE_ARGS ?= --prefix=${PREFIX}
CONFIGURE_POSTARGS ?=
BUILD_PRECMD ?=
BUILD_POSTCMD ?=
BUILD_ENV ?=
BUILD_COMMAND ?= ${MAKE}
BUILD_ARGS ?=
BUILD_POSTARGS ?=
INSTALL_PRECMD ?=
INSTALL_POSTCMD ?=
INSTALL_ENV ?=
INSTALL_COMMAND ?= ${BUILD_COMMAND}
INSTALL_ARGS ?= install
INSTALL_POSTARGS ?=
DEINSTALL_PRECMD ?=
DEINSTALL_POSTCMD ?=
DRY_RUN ?=
# fetching
fetch: ${DISTDIR}/${DISTFILE}
@echo ${DISTFILE} fetched
${DISTDIR}/%:
@test -d ${DISTDIR} || mkdir -p ${DISTDIR}
@${MAKE_RECURSIVE} do-fetch
def-fetch:
@for SITE in ${MASTER_SITES} ${MASTER_POST_SITES}; do \
if [ -f ${DISTDIR}/${DISTFILE} ]; then \
exit 0; \
fi; \
if [ \! -z "`echo $${SITE} | perl -ne '/^svn:\/\// && print 1'`" ]; then \
echo "Trying subversion: $${SITE}"; \
svn ls $${SITE}/${DISTFILE} >&- 2>&- \
&& svn cat $${SITE}/${DISTFILE} > ${DISTDIR}/${DISTFILE}; \
elif [ \! -z "`echo $${SITE} | perl -ne '/^(ftp|http):\/\// && print 1'`" ]; then \
if [ \! -z "${FETCH_CMD}" ]; then \
echo "Trying site: $${SITE}"; \
${FETCH_CMD} ${FETCH_ARGS} ${DISTDIR}/ $${SITE}/${DISTFILE} >&- ; \
else \
echo "Skip site: $${SITE}, no available fetcher found"; \
fi; \
elif [ \! -z "`echo $${SITE} | perl -ne 'm|^/| && print 1'`" ]; then \
echo "Trying local storage: $${SITE}"; \
test -f $${SITE}/${DISTFILE} && cp $${SITE}/${DISTFILE} ${DISTDIR}/ >&- ; \
else \
${call die,Scheme unknown - $${SITE}/${DISTFILE}}; \
fi; \
done; \
if [ \! -f ${DISTDIR}/${DISTFILE} ]; then \
${call die,Can not fetch ${DISTFILE}}; \
fi
# distcleaning
distclean:
@${MAKE_RECURSIVE} do-$@
@echo ${DISTFILE} removed
def-distclean:
@rm -f ${DISTDIR}/${DISTFILE}
# cleaning
clean:
@${MAKE_RECURSIVE} do-$@
@echo ${PORTNAME} cleaned
def-clean:
@${CLEAN_PRECMD}
@rm -Rf ${WRKDIR}
@${CLEAN_POSTCMD}
# extracting
extract: ${WRKDIR}/.extract
@echo ${DISTFILE} extracted
${WRKDIR}/.extract:
@${MAKE_RECURSIVE} fetch
@test -d ${WRKDIR} || mkdir -p ${WRKDIR}
@${MAKE_RECURSIVE} do-extract
@date > $@
def-extract:
@tar -xzf ${DISTDIR}/${DISTFILE} -C ${WRKDIR}
# configuring
configure: ${WRKDIR}/.configure
@echo ${PORTNAME} configured
${WRKDIR}/.configure:
ifneq (${PERL_MAKEMAKER}${PERL_MODBUILD},)
@if [ \! -d ${PREFIX}/lib/perl5 ]; then \
mkdir -p ${PREFIX}/lib/perl5; \
fi;
endif
@${MAKE_RECURSIVE} extract
@for DEP in ${PORT_DEPENDS}; do \
cd ${PORTSDIR}/all/$${DEP} \
&& ${MAKE_RECURSIVE} install || exit 1; \
done;
@${MAKE_RECURSIVE} do-configure
@date > $@
def-configure:
@${CONFIGURE_PRECMD}
@cd ${WRKSRC} \
&& ${CONFIGURE_ENV} ${CONFIGURE_POSTENV} ${CONFIGURE_COMMAND} ${CONFIGURE_ARGS} \
${CONFIGURE_POSTARGS}
ifdef PERL_MAKEMAKER
@cd ${WRKSRC} \
&& ${PERL} -pi -e 's/ doc_(perl|site|\$$\(INSTALLDIRS\))_install$$//' Makefile
ifeq (${shell perl -e 'print 1 if ${PERL_LEVEL}<=500503'},1)
@cd ${WRKSRC} \
&& ${PERL} -pi -e 's/^(INSTALLSITELIB|INSTALLSITEARCH|SITELIBEXP|SITEARCHEXP|INSTALLMAN1DIR|INSTALLMAN3DIR) = \/usr\/local/$$1 = \$$(PREFIX)/' Makefile
endif
endif
@${CONFIGURE_POSTCMD}
# building
build: ${WRKDIR}/.build
@echo ${PORTNAME} built
${WRKDIR}/.build:
@${MAKE_RECURSIVE} configure
@${MAKE_RECURSIVE} do-build
@date > $@
def-build:
@${BUILD_PRECMD}
@cd ${WRKSRC} \
&& ${BUILD_ENV} ${BUILD_COMMAND} ${BUILD_ARGS} ${BUILD_POSTARGS}
@${BUILD_POSTCMD}
# installing
install: ${PORTSDB}/${PORTNAME}
ifndef DRY_RUN
@echo "${PORTNAME} installed"
@echo "----------------------------------------"
@cat $^
@echo "----------------------------------------"
endif
${PORTSDB}/%:
@test -d ${PORTSDB} || mkdir -p ${PORTSDB}
ifneq (${PERL_CHECK},yes)
ifndef DRY_RUN
@${MAKE_RECURSIVE} build
@${PORTSDIR}/etc/snapshot ${PREFIX} > $@.before
@${MAKE_RECURSIVE} do-install
@echo "State: installed" > $@
@echo "Date: "`date` >> $@
@echo "Name: ${PORTNAME}" >> $@
@echo "Version: ${PORTVERSION}" >> $@
@${PORTSDIR}/etc/snapshot -d $@.before ${PREFIX} > $@.content
else
@echo "UNKNOWN: ${PORTNAME}"
endif
else
ifeq (${PERL_CHECKED},cancel)
@${call die,Cancelled}
else
ifeq (${PERL_CHECKED},skip)
ifndef DRY_RUN
@echo "State: skipped" > $@
@echo "Date: "`date` >> $@
@echo "Name: ${PORTNAME}" >> $@
@echo "Version: ${PORTVERSION}" >> $@
@${call warn,Skipped}
else
@echo "FOUND: ${PORTNAME}"
endif
else
ifeq (${PERL_CHECKED},install)
ifndef DRY_RUN
@${MAKE_RECURSIVE} build
@${PORTSDIR}/etc/snapshot ${PREFIX} > $@.before
@${MAKE_RECURSIVE} do-install
@echo "State: installed" > $@
@echo "Date: "`date` >> $@
@echo "Name: ${PORTNAME}" >> $@
@echo "Version: ${PORTVERSION}" >> $@
@${PORTSDIR}/etc/snapshot -d $@.before ${PREFIX} > $@.content
else
@echo "NOT FOUND: ${PORTNAME}"
endif
else
@`${PORTSDIR}/etc/chkmod ${PERL_CHECK_MODULE} ${PERL_CHECK_VERSION}` && ${MAKE_RECURSIVE_PERL} $@
endif
endif
endif
endif
def-install:
@${INSTALL_PRECMD}
@cd ${WRKSRC} \
&& ${INSTALL_ENV} ${INSTALL_COMMAND} ${INSTALL_ARGS} ${INSTALL_POSTARGS}
@${INSTALL_POSTCMD}
# deinstalling
deinstall:
@${DEINSTALL_PRECMD}
@if [ \! -f ${PORTSDB}/${PORTNAME} ]; then \
${call warn,${PORTNAME} is not installed}; \
else \
${MAKE_RECURSIVE} clean; \
if [ -f ${PORTSDB}/${PORTNAME}.content ]; then \
${PORTSDIR}/etc/snaprm ${PREFIX} ${PORTSDB}/${PORTNAME}.content; \
fi; \
rm -f ${PORTSDB}/${PORTNAME}; \
rm -f ${PORTSDB}/${PORTNAME}.before; \
rm -f ${PORTSDB}/${PORTNAME}.content; \
fi;
@${DEINSTALL_POSTCMD}
# reinstalling
reinstall: deinstall install
# service
get-%:
@echo -n ${$*}
# default do-
do-%:
@${MAKE_RECURSIVE} def-$*
# utils
define info
echo "##############################################################################"; \
echo "#"; \
echo "# INFO: "${1}; \
echo "#"; \
echo "##############################################################################"
endef
define warn
echo "##############################################################################"; \
echo "#"; \
echo "# WARNING: "${1}; \
echo "#"; \
echo "##############################################################################"
endef
define die
echo "##############################################################################"; \
echo "#"; \
echo "# ERROR: "${1}; \
echo "#"; \
echo "##############################################################################"; \
exit 99
endef
RSS Feed